Compliance Radar
Who was sanctioned, and for what?
Fines, court rulings and incidents from Europe and North America: 756 cases from 32 jurisdictions, each with an official source and checked against that source before publication. Filter by country, area of law and sector. Click a chart to drill down one level.
Click a bar to drill down one level.
Where?
by levelWhat for?
by topicWho?
by companyWhen?
per quarter, by date of decision| Period | Cases | Total |
|---|---|---|
| Q3 2023 | 0 | — |
| Q4 2023 | 0 | — |
| Q1 2024 | 1 | €136,295 |
| Q2 2024 | 0 | — |
| Q3 2024 | 0 | — |
| Q4 2024 | 0 | — |
| Q1 2025 | 0 | — |
| Q2 2025 | 1 | €140,306 |
| Q3 2025 | 1 | €89,949 |
| Q4 2025 | 0 | — |
| Q1 2026 | 0 | — |
| Q2 2026 | 0 | — |
| Q3 2026 | 0 | — |
3 cases
24 Jul 2025 Metex Heat Treating Ltd.Heat treatment firm Metex: CA$144,000 after flash fire during furnace start-up €89,949
When restarting a hardening furnace (hydrogen and oil quench bath) that had been shut down for weeks, residual vapours ignited because too much time elapsed between the nitrogen purge and ignition; two workers were seriously injured. Only one was wearing flame-resistant clothing; the other had not been provided with any. Fine of CA$144,000 plus victim fine surcharge.
Infrequently performed tasks such as restarting equipment require fixed step-by-step procedures and complete protective equipment for everyone involved.
Start-up procedures for industrial furnaces; protective clothing
- Authority / court
- Ontario Court of Justice Brampton (Ermittlung: Ontario Ministry of Labour, Immigration, Training and Skills Development)
- Area of law
- Health and safety and employment law · Workplace safety and accidents
- Legal basis
- Section 25(2)(h) Occupational Health and Safety Act (Ontario)
- Action
- Fine
- Status of proceedings
- final
- Sector
- Steel and metals
- Mitigating circumstances
- Guilty plea.
- Published
- 21 Aug 2025
Original amount 144,000 CAD, converted at the ECB reference rate of 24 Jul 2025.
- Brampton Company Fined $144,000 After Furnace Explosion Injures Workers (Ontario Newsroom, Court Bulletin) Press release of an authority
Checked against the official source on 25 Sep 2026 · Direct link
Report an error
22 May 2025 Brunner Manufacturing & Sales Ltd. (Tecna Forge)Forge Tecna Forge: fatal fall during first-time press maintenance – CA$220,000 €140,306
In 2023, two employees of the forge in Niagara Falls removed a spacer from a press for the first time; instead of the guide bolts prescribed in the manual, they used makeshift steel bolts and left the piston assembly, weighing around 1.25 t, hanging from the crane. The load swung out, and a worker fell to the ground with it and died. The company had not informed the employees of the dangers of deviating from the operating manual; fine of CA$220,000 plus victim fine surcharge.
Maintenance tasks performed for the first time require instruction based on the manufacturer's manual – improvising with heavy loads ends in fatalities.
Working in accordance with the operating manual on infrequent maintenance tasks
Missing or inadequate training played a role in the decision.
- Authority / court
- Provincial Offences Court Welland (Ermittlung: Ontario Ministry of Labour, Immigration, Training and Skills Development)
- Area of law
- Health and safety and employment law · Workplace safety and accidents
- Legal basis
- Section 25(2)(d) Occupational Health and Safety Act (Ontario)
- Action
- Fine
- Status of proceedings
- final
- Sector
- Steel and metals
- Mitigating circumstances
- Guilty plea.
- Published
- 20 Jun 2025
Original amount 220,000 CAD, converted at the ECB reference rate of 22 May 2025.
- Niagara Falls Manufacturer Fined $220,000 Following Workplace Fatality (Ontario Newsroom, Court Bulletin) Press release of an authority
Checked against the official source on 25 Sep 2026 · Direct link
Report an error
26 Feb 2024 Stelco Inc.Stelco: CA$200,000 after fatal conveyor accident involving a lone worker €136,295
A coal worker working alone at the Hamilton steelworks was presumably applying belt dressing spray between the running belt and the head pulley when he was fatally caught; the head section of the conveyor was not guarded, and there was no safe method for applying the spray while the belt was running. Fine of CA$200,000 plus victim fine surcharge.
Where employees have to intervene while equipment is running, a safe technical solution is needed – and lone working requires a monitoring concept.
No intervention in running conveyor systems; lone working
- Authority / court
- Ontario Court of Justice Hamilton (Ermittlung: Ontario Ministry of Labour, Immigration, Training and Skills Development)
- Area of law
- Health and safety and employment law · Workplace safety and accidents
- Legal basis
- Section 25(1)(c) Occupational Health and Safety Act (Ontario) i. V. m. s. 196(2)(a) O. Reg. 854 (Mines and Mining Plants)
- Action
- Fine
- Status of proceedings
- final
- Sector
- Steel and metals
- Mitigating circumstances
- Guilty plea; subsequently improved rules on lone working and machine guarding across the entire operation.
- Published
- 6 Mar 2024
Original amount 200,000 CAD, converted at the ECB reference rate of 26 Feb 2024.
- Workplace Fatality Results in $200,000 Fine for Hamilton Steel Company (Ontario Newsroom, Court Bulletin) Press release of an authority
Checked against the official source on 25 Sep 2026 · Direct link